January 28 2024 0Comment
schlage encode Plus Naples FL Smart lock/ keypad lock

Smart Security Simplified: Navigating Code Settings for Schlage, Kwikset, Lockly, and Yale Locks

Schlage Smart Locks

Finding the Programming Code:

  • Check the user manual or find a sticker on the back of the keypad or inside the battery compartment.

Changing the Programming Code:

  1. Enter the current six-digit programming code.
  2. Press the Schlage button, then press 3.
  3. Enter the new six-digit programming code, and re-enter for confirmation.
  4. A green light and long beep signal success.

Adding a New User Code:

  1. Enter the programming code.
  2. Press 1, enter a new four-digit user code, and re-enter it.
  3. A green light and beep confirm the addition.

Deleting a User Code:

  1. Enter the programming code.
  2. Press 2, enter the user code to delete, and re-enter it.
  3. A green light and beep indicate successful deletion.

Kwikset Smart Locks

Changing the Programming Code:

  1. Ensure the door is open.
  2. Press and release the program button.
  3. Press 3, then the Kwikset button.
  4. Enter a new 4-8 digit programming code.
  5. Press the Kwikset button and re-enter the new code.
  6. A green flash and beep indicate success.

Adding a New User Code:

  1. Press the program button once.
  2. Enter the new user code on the keypad.
  3. Press the lock button.
  4. Press the program button again to exit.

Deleting a User Code:

  1. Press the program button twice.
  2. Enter the user code to delete.
  3. Press the lock button.
  4. Press the program button to exit.

Lockly Smart Locks

Setting Up Access Codes:

  1. Press the program button at the back of the lock.
  2. Press 1 to enter “Add Passcode Mode.”
  3. Input the new door code (6-8 digits), press OK, and re-enter to confirm.
  4. Access codes can also be managed via the Lockly app for more advanced settings like issuing remote access codes or eKeys.

Yale Smart Locks

Changing Master Pin Code:

  1. Enter the current master code and press the gear icon.
  2. Press 1, then enter the new master code.
  3. Re-enter the new master code for confirmation.

Adding a User Code:

  1. Enter the master code and press the gear icon.
  2. Press 2, enter the new user code, and re-enter it.

Deleting a User Code:

  1. Enter the master code and press the gear icon.
  2. Press 3, enter the user code to delete, and re-enter it.

This guide provides a general overview of the code management process for these smart locks. For model-specific instructions or troubleshooting, consult the user manual or the manufacturer’s customer support.

napleslocksmith247-com

Write a Reply or Comment